TM 11-4920-292-15
NOTE
dicated by the digital controller in table F2 of
The total value of 1.5 is equivalent to
the swing data sheet.
an rms error of 0.25. If the rms error
(c) Determine the remaining compass
is desired, divide the total of the added
system error. Square each error and add the
values. If this total is greater than 1.5, the
values by 24 and compute the square
root of the result.
system is not properly calibrated. Set the
(d) When the system is fully compen-
remote magnetic compensator TRANSMIS-
SION ERROR controls as indicated in figure
sated, remove all adapter cables and return the
system to its original configuration.
9-28
Previous Page
