ARMY TM 5-6675-308-12
MARINE CORPS TM 08837A-12/1A
base of transition joint. Secure hose with
(2) Secure battery box in position with tiedown
b e l t assembly hooked to corresponding
Unsnap CDU from its bracket on computer top.
i.
Route CDU and cable assembly W1 as shown in
(3) Connect cable assembly W6 connector W6Pl
bracket using two clamping catches. See figure
2-15 showing how CDU is attached to bracket.
(4) Return passenger seat into position and secure.
Top bows of utility truck may be strapped to the
j.
h. Connect cable assembly W7 connector W7P1 to
Position theodolite and tripods as shown in fig-
k.
NOTE
ure 2-10. Check that cooling airflow to PADS
units is not blocked. Check that shock mount
If vehicle is equipped with a hardtop and
base has room to move freely and that equip-
gasoline fired heater, slide two clamps
ment is not placed on cables or cable connectors.
onto previously removed flex hose. Slip
l.
ends of flex hose onto heater flange and
Change 2