TM 55-1905-223-24-14
REPLACEMENT
CAUTION
The following step requires two soldiers because of the
weight (66 pounds) of gyro compass.
a.
Position gyro compass (9) on gyro control and power assembly (8) and secure with four flat washers (7), lock
washers (6), and captive socket head screws (5), loosely.
b.
Align gyro compass (9) on gyro control and power assembly (8) with scribed fore and aft centerline marks on
gyro compass (9) base.
c.
Secure four captive socket head screws (5), lockwashers (6), and flat flat washers (7), being careful not to
disturb alignment.
d.
Connect cable C-LC12 (4) to binnacle (1) and secure with four lockwashers (3) and pan head screws (2).
e.
Start compass (TM 55-1905-223-10).
2-19
Previous Page
