ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Table 3-2. Tools and Materials Required for Direct Support Maintenance Continued
NSN
Purpose
Or Specification
Item
Hexhead driver, 7/64-inch for
Used in conjunction with torque wrench to
5120-00-761-2015
1/4-inch drive
torque covers on computer, CDU, and
computer power supply to computer
Used in conjunction with torque wrench to
Hexhead driver, 3/16-inch for
5120-00-935-4612
torque the mounting bolt assemblies to IMU
1/4-inch drive
mounts
Installation tool, insert TD 524L
Used in the replacement of inserts in subfloor
plate
Insulation sleeving, electrical,
Used on component leads in power supplies
MIL-I-23053/5A
heat shrinkable, polyolefin,
flexible, crosslinked
Used in removal of computer and CDU covers
Key, sockethead, L-type handle
5120-00-889-2162
7/64-inch
Used in removal of computer power from
Key, sockethead, L-type handle,
5120-00-951-6589
7/64-inch
computer
Used in scraping excess adhesive from gaskets
Knife, pocket
and unit involved
Used to lubricate clamping and strike catches
Lubricating oil, general purpose
0-196
Magnet
Used to reset unit malfunction
5120-00-5454268
Mirror, inspection
Used to view obstructed components
5120-00-596-1098
Multirneter AN/USM-223
Used for testing and troubleshooting
Pliers, slip-joint, 6-inch
Used in repair of captive screws
5120-00-224-1567
Pliers, long-nose, 6-or 6-1/2 inch
Used in removal and replacement of components
5120-00-247-5177 or
and computer power supply guide pins
5120-00-293-3481
Used in cutting and trimming of wire
Pliers, diagonal-cutting,
4-1/2 inch
Power supply, 28 VDC
Used for primary power during testing. Minimum
6310-00-947-9670
MH 28-200rS (Christie)
of 100 amps at 28 VDC required
MIL-S-22473
Used to apply prior to applying sealing
Primer, thread sealant
compound MIL-S-22473, Grades C and H
5120-00-293-3512
Punch, center
Used in the installation of the CDU mounting
bracket in winterization M151 series vehicle
Saw, hole, 1.00-inch O.D.
Used for first time installation of
cable W7 in HMMV and CUCV
Screwdriver, cross-tip, no. O,
Used in removal and replacement of the elapsed
5120-00-060-2004
time indicator and the CDU front panel
4-inch
assembly
Change 3
3-9
Previous Page
