TM 5-6675-307-14
(2) Telescope.
light attachment, the other end is inserted through a hole
Magnification .......................... 30 x (Power)
in the left end of the plate level.
(e) Tools.
Minimum focus ....................... 4.8 feet (1.46 meter)
Screwdrivers
and
Field of view............................ 10(degree) 30' (minutes)
adjusting pins are in the case for adjustment and
Effective aperture .................... 1.75
inch,
40
mm
maintenance of the theodolite. Also provided is a
(millimeter)
spanner wrench for the tangent screws.
(4.44 centimeters)
(f) Miscellaneous. The tool and
Stadia Lines:
accessory case also contains a tube of lubricant,
Ratio ................................ 1:100
cleaning brush, chamois, lens tissue, orange sticks, and
Constant .......................... 0
plastic cover.
(3) Circles.
(2) Battery case. The battery case is a
metal box with a carrying handle that can be mounted
Vertical ............................ 4 in. (10.16 centimeters)
on the tripod. The case contains four batteries, four
Horizontal ........................ 4 in. (10.16 centimeters)
Divided ................................... 360 degrees
spare lamps, a cable with connectors, a hand lamp with
Direct reading ......................... 1 minute (60 seconds)
cord and connector, jacks, and a rheostat. The four
Reading by estimation............. 0.1 min
batteries are troop installed items. The cable installs in
(4) Levels.
either jack in the side of the battery box and in the jack
Sensitivity of plate level................. 20 sec (seconds) per 2 mm
in the tribrach. The hand lamp cable is installed in the
Sensitivity of circular level ....... 10 min per 2 mm
other jack in the case.
Sensitivity of telescope co-
(3) Knapsack. The knapsack is provided
incidence level.................. 60 sec per 2 mm
for field transport of the theodolite.
The canvas
Sensitivity of altitude co-
knapsack is equipped with shoulder straps and two
incidence level.................. 45 sec per 2 mm
pockets.
(5) Centering device.
1-8.
Identification and Tabulated Data
Centering range of theodolite on tripod
a. Identification.
(6) Dimensions and weights.
The equipment has the
following identification markings:
Theodolite:
(1) Theodolite. The manufacturer's name,
Dimensions ...................... 12 in. high x 8 in. wide
x 7 in. deep
model, part number, code number, contract number,
Weight ............................. 13 lbs. (pounds)
year of manufacture, serial number, and the National
Tripod:
Stock Number are printed on a plate mounted below the
Extended.......................... 59 in. (149.9 cm)
optical plummet eyepiece.
Retracted ......................... 36 in. (99.4 cm)
(2) Carrying case. The manufacturer's
Weight . ........................... 15 lbs.
name and part number, and the Federal Stock Number
Carrying case:
are stenciled on the top of the carrying case.
Dimensions ...................... 9/4 x 15 3/4 x 101/2 in.
b. Tabulated Data.
Weight (empty) ................ 12 lbs.
(1) Theodolite.
Transportation case:
Dimensions ...................... 10 3/4 x 20 1/4 x 15 in.
Manufacturer........................... Keuffel & Esser
Weight (empty) ................ 30 lbs. max.
Model...................................... K E/G6-730075
1-9.
Difference in Models
Type ....................................... Directional Surveying
Serial number range................ 001 to 266
This manual covers only the Keuffel & Esser Model K
E/G6-730075 Theodolite. No known differences exist
for the model covered by this manual.
1-5
Previous Page
