TM 11-5826-251-24P
Code
Application/Explanation
f. Description. Indicates the Federal item name,
H - The lowest maintenance level capable of complete
and if required, a minimum description to identify the
repair of the support item is the general support
item.
g. Unit of Measure (U/M). Indicates the standard of
level.
D - The lowest maintenance level capable of complete
the basic quantity of the listed item as used in performing
repair of the support item is the depot level.
the actual maintenance function. This measure is
Z - Nonreparable. No repair is authorized.
expressed by a two-character alphabetical abbreviation
(e.g., ea, in, pr, etc). When the unit of measure differs
(3) Recoverability code. Recoverability codes
from the unit of issue, the lowest unit of issue that will
are assigned to support items to indicate the disposition
satisfy the required units of measure will be
action on unserviceable items. The recoverability code is
requisitioned.
h. Quantity Incorporated in Unit. Indicates the
entered in the fifth position of the Uniform SMR Code
format as follows:
quantity of the item used in the breakout shown on the
illustration figure, which is prepared for a functional
Recoverability
group, subfunctional group, or an assembly.
codes
Definition
4.
Special Information
Z - Nonreparable item.
When unserviceable, con-
a. Usable on codes are shown in the description
demn and dispose at the level indicated in
column. Uncoded items are applicable to all models.
position 3.
Identification of the usable on codes used in this
H - Reparable item. When uneconomically reparable,
publication are:
condemn and dispose at the general support
level.
Code
Used on
D - Reparable item. When beyond lower level repair
DIL
AN/PSN-6(V)
capability, return to depot. Condemnation and
DIM
Vehicle Mount Adapter
disposal not authorized below depot level
L - Reparable item.
Repair, condemnation, and
b. The following publications
pertain
to
the
disposal not authorized below depot/specialized
AN/PSN-6(V) and its components:
repair activity level.
TM 11-5826-251-12, Navigation Set, Position Fixing
A - Item requires special handling or condemnation
Loran AN/PSN-6 and Vehicle Mount Adapter Group OF-
procedures because of specific reasons (i.e.,
34/PSN-6
precious metal content, high dollar value, critical
TM 11-5826-251-34, Navigation Set, Position Fixing
material or hazardous material).
Refer to
Loran AN/PSN-6 and Vehicle Mount Adapter Group OF-
appropriate manuals/directives for specific
34/PSN-6
instructions.
5.
How to Locate Repair Pods
c. National Stock Number. Indicates the National
stock number assigned to the item and will be used for
a. When National stock number or part number is
requisitioning purposes.
unknown.
d. Federal Supply Code for Manufacturer (FSCM).
(1) First.
Using the table of contents,
The FSCM is a 5-digit numeric code listed in SB 708-
determine the functional group within which the item
41/42 which is used to identify the manufacturer,
belongs.
This is necessary since illustrations are
distributor, or Government agency, etc.
prepared for functional groups and listings are divided
e. Part Number. Indicates the primary number
into the same groups.
used by the manufacturer (individual, company, firm,
(2) Second. Find the illustration covering the
corporation, or Government activity), which controls the
functional group to which the item belongs.
design and characteristics of the item by means of its
(3) Third. Identify the item on the illustration
engineering drawings, specifications, standards, and
and note the illustration figure and item number of the
inspection requirements to identify an item or range of
item.
items.
(4) Fourth. Using the Repair Parts Listing, find
the figure and item number noted on the illustration.
NOTE
b. When National stock number or part number is
When a stock numbered item is requisi-tioned,
known.
the repair part received may have a different
(1) First. Using the Index of National Stock
part number than the part being replaced.
Numbers and Part Numbers, find the pertinent
2
Previous Page
