TM 11-5825-231-20P-1
SECTION I
INTRODUCTION
1. Scope
NOTE
This manual lists spares and repair parts; special tools;
Cannibalization or salvage may be used as a
special test, measurement, and diagnostic equipment
source of supply for any items source coded
(TM DE), and other special support equipment required
above except those coded XA and aircraft
for performance of organizational maintenance of the
support items as restricted by AR 700-42.
(2) Maintenance code. Maintenance codes are
ANITRD-15, AN/TRD-15A, AN/TRD-23, and AN/TRD-
23A. It authorizes the requisitioning and issue of spares
assigned to indicate the levels of maintenance
and repair parts as indicated by the source and
authorized to USE and REPAIR support items. The
maintenance codes.
maintenance codes are entered in the third and fourth
positions of the Uniform SMR Code format as follows:
2. General
(a) The maintenance code entered in the third
This Repair Parts and Special Tools List is divided into
position will indicate the lowest maintenance level
the following sections:
authorized to remove, replace, and use the support item.
a. Section II. Repair Parts List. A list of spares and
The maintenance code entered in the third position will
repair parts authorized for use in the performance of
indicate one of the following levels of maintenance:
maintenance. The list also includes parts which must be
Code
Application/Explanation
removed for replacement of the authorized parts. Parts
O -Support item is removed, replaced, used at the
lists are composed of functional groups in numeric
organizational level.
sequence, with the parts in each group listed in figure
(b) The maintenance code entered in the fourth
and item number sequence.
b. Section III. Special Tools List. Not applicable.
position indicates whether the item is to be repaired and
identifies the lowest maintenance level with the capability
c. Section IV. National Stock Number and Part Number
to perform complete repair (i.e., all authorized
Index. A list, in National item identification number
maintenance functions). This position will contain one of
(NIIN) sequence, of all National stock numbers (NSN)
the following maintenance codes:
appearing in the listings, followed by a list, in alphameric
Code
Application/Explanation
sequence, of all part numbers appearing in the listings.
O --The lowest maintenance level capable of
National stock numbers and part numbers are cross-
complete repair of the support item is the
referenced to each illustration figure and item number
organizational level.
appearance.
F
--The lowest maintenance level capable of
3. Explanation of Columns
complete repair of the support item is the direct
a. Illustration. This column is divided as follows:
support level.
(1) Figure number. Indicates the figure number of
D
--The lowest maintenance level capable of
the illustration on which the item is shown.
complete repair of the support item is the depot
(2) Item number. The number used to identify item
level.
called out in the illustration.
Z
--Nonreparable. No repair is authorized.
b. Source, Maintenance, and Recoverability (SMR)
(3) Recoverability code. Recoverability codes are
Codes.
assigned to support items to indicate the disposition
(1) Source code. Source codes indicate the manner
action on unserviceable items. The recoverability code is
of acquiring support items for maintenance, repair, or
entered in the fifth position of the Uniform SMR Code
overhaul of end items. Source codes are entered in the
format as follows:
first and second positions of the Uniform SMR Code
Recoverability codes
Definition
format as follows:
Z
-Nonreparable item.
When unserviceable,
Code
Definition
condemn and dispose at the level indicated in
PA --Item procured and stocked for anticipated or
position 3.
known usage.
O --Reparable item. When uneconomically reparable,
PD --Support item, excluding support equipment,
condemn and dispose at organizational level.
procured for initial issue or outfitting and stocked
F
--Reparable item. When uneconomically reparable,
only for subsequent or additional initial issues or
condemn and dispose at the direct support level.
Not subject to automatic
D
-Reparable item. When beyond lower level repair
replenishment.
capability, return to depot. Condemnation and
XD -A support item that is not stocked. When required,
item will be procured through normal supply
channels.
1
Previous Page
