TM 5-6675-307-14
d.
Reassembly.
c.
Inspection and Repair.
(1) Apply light coating of grease,
(1) Inspect straps for cuts, wear, and
Specification MIL-G-10924 to upper threads of screw (9,
damaged seams.
fig. 7-1), surface of pins on hinges (18), inside and
(2) Check wooden legs for cracks, splits,
outside of bushing (15) and threads of wing nuts (36).
wear and warping.
(2) Reassemble tripod in the reverse
(3) Paint wooden legs if protective coating
order of disassembly .
is worn or damaged.
(4) Replace any defective part that cannot
be repaired as given above.
Section II. MAINTENANCE OF CARRYING AND TRANSPORT CASES
7-3.
Carrying Case
by stainless steel rivets. A gasket is provided which with
a. General. The carrying case consists of two
desiccant, protects the instrument from moisture.
b. Disassembly. Disassemble carrying case
halves which contain inserts which serve to cushion the
in the order of the index numbers in figure 7-2.
theodolite during transport or storage. The halves are
held together by latches which are secured to the case
7-3