TM 5-6675-307-14
4-18. Transport Case
(2) Inspection and replacement.
(a) Inspect the inserts for dirt,
a. General.
The transport case is made of
fiberglass and contains inserts which are contoured to fit
(b) If inserts are dirty, wash them with
the exterior of the carrying case and act as cushions
during transport or storage. The case is also provided
warm water and mild detergent.
(c) If the inserts are damaged, replace
with a gasket for moisture protection of the contents.
b. Insert Removal. Refer to figure 4-7 and remove
them.
(3) Installation.
the inserts.
Install the inserts in the
reverse order of removal.
Figure 4-6. Transport case inserts, removal and installation.
4-9