TM 5-6675-250-10
2-8. OPERATION OF AUXILIARY EQUIPMENT
HAND-LAMP ASSEMBLY
When operating in the dark, light from the
cage-uncage indicator is visible at 45 meters.
The indicator should be shielded to avoid
detection when security is required.
a.
D e s c r i p t i o n . The hand-lamp assembly is
provided for use during night operations.
The assembly is connected to receptacle
on the ECU during use and is turned off
and on by an adjacent switch. An eight-
foot cord permits the lamp to be extended
during operations. The assembly is hand-
and indicators on the ECU and GRU during
night operations.
b.
Installation. Remove the protective cap (1)
fron the hand-lamp receptacle (2). Connect
the plug to the HAND-LAMP receptacle on
the ECU (3). With power applied to the ECU
and with the MODE SELECT switch (4) in
an activated position, place the HAND-
LAMP switch (5) to ON to turn the hand-
lamp assembly on.
2-52