TM5-1260-206-34
Table 7-5.
Power ON/OFF Lamp Maintenance Procedures
STEP ITEM
PROCEDURE
NO.
REMOVAL
1
Top cover plate (1)
Loosen four screws and washers (2) and remove.
2
Lamp (3)
Remove by doing the following:
a.
Disconnect two wires from lamp.
b.
Cut off four plastic tabs (4).
c. Remove lamp through front panel.
REPLACEMENT
3
Lamp
Replace by doing the following:
a. Press four plastic tabs.
Insert lamp through cutout in front panel.
b.
Reconnect two wires.
c.
4
Top cover plate
Secure with four screws and washers.
7-7