TM 5-1260-206-34
Table 3-11. Chassis Wiring Maintenance Procedures
STEP ITEM
PROCEDURE
NO.
Bottom cover plate
1
Remove 24 screws and washers. Lift off cover plate.
2
Wiring
a. Locate pins to be checked.
b.
COMPONENT REMOVAL
Card A, B, C, D, F, and G
3
Remove.
Component
4
Note pins to which resistor or capacitor is connected. Unsolder
and remove component.
COMPONENT REPLACEMENT
Component
5
a. Put insulating material or shrinkable tubing on component leads
that may touch other wirewrap pins.
b.
Resolder resistor or capacitor.
6
Card A, B, C, D, F, and G
Bottom cover plate
7
Replace and secure with 24 screws and washers.
3-23