*TM 11-6625-247-24P
SECTION I
INTRODUCTION
XD--A support item that is not stocked. When required,
1. Scope
item will be procured through normal supply
This manual lists spares and repair parts; special tools;
channels.
special test, measurement, and diagnostic equipment
NOTE
(TMDE), and other special support equipment required for
performance of organizational, direct support, and general
Cannibalization or salvage may be
support maintenance of the AN/ASM-61. It authorizes the
used u a source of supply for any
requisitioning and issue of spares and repair parts as
items source coded above except
indicated by the source and maintenance codes.
those coded XA and aircraft support
items restricted by AR 700-42.
2. General
(2) Maintenance code. Maintenance codes are
This Repair Parts and Special Tools List is divided into the
signed to indicate the levels of maintenance authorized to
following sections:
USE and REPAIR support items The maintenance codes
a. Section I. Repair Parts List. A list of and repair
are entered in the third and fourth positions of the Uniform
parts authorized for use in the performance of
SMR Code format as follows:
maintenance. The list also includes parts which must be
(a) The maintenance code entered in the third
removed for replacement of the authorized parts. Parts
position will indicate the lowest maintenance level
lists are composed of functional groups in numeric
authorized to remove, replace, and use the support item.
sequence, with the parts in each group listed in figure and
The maintenance code entered in the third position will
item number sequence.
indicate one of the following levels of maintenance:
Code
Application/Explanation
National Stock Number and Part
O--Support item is removed, replaced, used at the
Number Index. A list, in National item identification
organizational level.
number (NIIN) sequence, of all National stock numbers
H--Support item is removed, replaced used at the general
(NSN) appearing in the listings, followed by a list, in
support level.
alphameric sequence, of all part numbers appearing in the
(b) The maintenance code entered in the fourth
listings. National stock numbers and part numbers are
position indicates whether the item is to be repaired and
cross-referenced to each illustration figure and item
identifies the lowest maintenance level with the capability
number appearance.
to perform complete repair (i.e., all authorized
maintenance functions). This position will contain one of
3. Explanation of Columns
the following maintenance codes:
a. Illustration. This column is divided as follows:
Code
Application/Explanation
(1) Figure number. Indicates the figure number of
H--The lowest maintenance level capable of complete
the illustration on which the item is shown.
repair of the support item is the general support
(2) Item number. The number used to identify item
level.
called out in the illustration.
Z--Nonreparable. No repair is authorized.
b. Source, Maintenance, and Recoverability (SMR)
(3) Recoverability code. Recoverability codes are
Codes.
assigned to support items to indicate the disposition action
(1) Source code.
Source codes indicate the
on unserviceable items. The recoverability code is entered
manner of acquiring support items for maintenance, repair,
in the fifth position of the Uniform SMR Code format as
or overhaul of end items. Source codes are entered in the
follows:
first and second positions of the Uniform SMR Code
format as follows:
Recoverability
codes
Definition
Code
Definition
Z--Nonreparable item. When unserviceable, condemn
PA--Item procured and stocked for anticipated or known
and dispose at the level indicated in position 3.
usage.
H--Reparable item.
When uneconomically reparable,
AH--Item to be assembled at general support maintenance
condemn and dispose at the general support level.
level.
1